Nozzles for spraying liquid fuel of steam-mechanical type
Steam-mechanical (pneumatic) type nozzles are designed for spraying liquid fuel using water vapor or air. The supply of the second component (steam or air) makes it possible to reduce the size of droplets and increase the completeness of combustion. The consequence is a reduction in emissions of harmful substances.
Material
Alloy Steel "08х18н9"
Join
Internal
Thread
Execution
Metric / Pipe
Nozzles operation
Mechanical
*different spray angle by special order
The fuel consumption in the table is presented in the range of values from the minimum to the maximum possible. When ordering, write us the required fuel consumption (in kg/h) at a pressure of (atm).
It is also necessary to specify the length of the nozzle from the mounting flange to the nozzle section of the sprayer.
It is also necessary to specify the length of the nozzle from the mounting flange to the nozzle section of the sprayer.
Размеры ПМФ, Т20
The act of testing nozzles
- Certified according to "ТУ.7473829.834.2015"
- GOST 39 674−86
- ISO 8344−22
- The service life depends on the operating conditions (up to 20 years)
- 12 months warranty
- GOST 39 674−86
- ISO 8344−22
- The service life depends on the operating conditions (up to 20 years)
- 12 months warranty
ПМФ-А1
(PMF-A1)
(PMF-A1)
ПМФ-А2
(PMF-A2)
(PMF-A2)
Т20-ДТ
(T20-DT)
(T20-DT)