Nozzles for spraying liquid fuel of mechanical type
Liquid fuel nozzles of mechanical type the "TF" type type are designed for spraying liquid fuel for burning it in the volume of the combustion chamber. This type of injectors does not require the supply of additional components (air, steam) for operation.
Material
Alloy Steel "08х18н9"
Join
Internal
Thread
Execution
Metric / Pipe
Nozzles operation
Mechanical
*different spray angle by special order
The fuel consumption in the table is presented in the range of values from the minimum to the maximum possible. When ordering, write us the required fuel consumption (in kg/h) at a pressure of (atm).
It is also necessary to specify the length of the nozzle from the mounting flange to the nozzle section of the sprayer.
It is also necessary to specify the length of the nozzle from the mounting flange to the nozzle section of the sprayer.
Dimensions of the TF fuel nozzles
ТФ-A1
(TF-A1)
(TF-A1)
ТФ-А2
(TF-A2)
(TF-A2)
ТФ-ДТ
(TF-DT)
(TF-DT)
The act of testing nozzles
- Certified according to "ТУ.7473829.834.2015"
- GOST 39 674−86
- ISO 8344−22
- The service life depends on the operating conditions (up to 20 years)
- 12 months warranty
- GOST 39 674−86
- ISO 8344−22
- The service life depends on the operating conditions (up to 20 years)
- 12 months warranty