Nozzles for spraying liquid fuel of emulsified type

Nozzles for spraying liquid fuel with emulsification. Suitable for spraying fuel oil supplied at low pressures with a temperature of at least 70 ° C. These nozzles are characterized by reduced carbon formation at the end due to the high speed of droplets. With a constant flow of steam, the fuel oil consumption is directly proportional to the fuel oil pressure, which facilitates flow control over a wide range.

Material

Alloy Steel "08х18н9"

Join

Internal

Thread

Execution

Metric / Pipe

Nozzles operation

Emulsified

*different spray angle by special order
**when using the nozzles, the steam supply pressure should be greater than the fuel oil supply pressure

The fuel consumption in the table is presented in the range of values from the minimum to the maximum possible. When ordering, write us the required fuel consumption (in kg/h) at a pressure of (atm).
It is also necessary to specify the length of the nozzle from the mounting flange to the nozzle section of the sprayer.

Dimensions of the EMF-B

- Certified according to "ТУ.7473829.834.2015"
- GOST 39 674−86
- ISO 8344−22
- The service life depends on the operating conditions (up to 20 years)
- 12 months warranty

The act of testing nozzles